Step 3 scrub the area briskly with an old toothbrush to remove the burn mark. There are products on the market designed for such a task but if you don t have one lying around make use of common household ingredients that will remove burn marks from your sink s surface.
Turn the hot water on.
How to get burn marks out of bathroom sink. Place the stopper in the porcelain sink. Rinse the bathroom sink top and leave it wet while you work on the burned area. Spread onto the stain and let it sit for up to 24 hours.
Rub in one direction to start and rotate to 90 degrees until the burn mark is no longer noticeable. Soap scum and water stains require products that break down and dissolve the substances without harming the sink surface. Wipe the mixture off.
Measure out and pour 3 cups of white vinegar into the sink under the faucet. Use the paintbrush to apply a small amount of sealant to the area that you repaired. Apply force when scrubbing with the toothbrush to make sure all of the burn mark is removed.
Squeeze a thick layer of plain white toothpaste onto the burn spot. Instructions mix baking soda and hydrogen peroxide together to make a paste. Start by making a paste of baking soda and water.
You will need to use a sealant that is compatible with your sink material so check the. The surface of bathroom sinks become marred by a thick film of soap scum and white scale from hard water. Clean the countertop with a soft scrub cleanser such as soft scrub or comet and an old toothbrush.
Start with a liquid soap and a scrubbing sponge and see how much of the burn mark can be removed. Shut the water off when it s deep enough to cover the marks. Let the toothpaste sit on the sink for 10 minutes.
Apply the paste to the burn and let it sit for a few minutes. These tough stains cling to your sinks despite wiping with commercial bathroom cleaners. Reseal the damaged area.
Wipe the area with a damp rag to remove the toothpaste. Scrub it lightly with steel wool but don t use too much force. Use the smallest grade of the abrasive pads in the kit and gently rub the burn mark on the wet countertop.
Scrub gently while rinsing and repeat if needed. Scrub the spot gently in circular motions with an old toothbrush to remove the cigarette burn spot. The first step to remove a burn mark from a plastic sink is trying to remove as much discoloration as possible from the plastic surface.